The Ignition Expander module (IEX) is designed to increase the ignition output capacity of MoTeC ECUs.
The IEX connects to a single ignition output on the ECU and can drive up to 8 ignition modules. For 10 and 12 coil applications, two IEX units can be used.
Note that the IEX does not drive the coil directly, an ignition module is still required.
An IEX is not a stand-alone device.
M4, M48, M8, M84, M400, M600, M800, M880
- Not compatible with M1 Series ECUs
8 x ignition outputs
Suits most ignition modules of falling edge type
The dwell time is controlled by the ECU
For 10 and 12 coil applications, two IEX units can be used
MoTeC specific coded signal supplied from a single ignition output on the ECU
Case size 70 x 100 x 35 mm
Weight 220 gram
- 18 pin waterproof connector with gold plated contacts
(Click on the part number to download the datasheet.)
IEX: Ignition Expander
18 Way M8/IEX/TCMUX/CDI/4 Connector