2 rotor 4 coil with an M600

Discussion and support for MoTeC's latest generation ECUs

2 rotor 4 coil with an M600

Postby Giltgy on Tue Mar 30, 2021 12:17 pm

Is there any technical drawing besides the M2R ones that
describe the 4 coil setup for a 2 rotor? I am thinking the 140/141
mode described in the M2R notes is what I should be using when
wiring/setting up my ignition? There is a dwg. (M24) which is referencing the
M4-M8 as well, however, since my ecu is an M600 I think the M2R
is what I should reference. Any help would be appreciated.
Motor is full race Mazda 12a-N/A, road racing use

Best,
Guil
Giltgy
 
Posts: 6
Joined: Mon Feb 15, 2021 11:10 am

Re: 2 rotor 4 coil with an M600

Postby SDean on Tue Mar 30, 2021 3:17 pm

Hi,

Have a look at document M47, this is the wiring for the CDI, but it is the way that the wiring is done for Mode 140.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 882
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne


Return to M400, M600, M800 and M880 ECUs

Who is online

Users browsing this forum: No registered users and 22 guests