Bought a car with an ADL2. Looking for some info on it

Discontinued earlier generation Dash Loggers

Bought a car with an ADL2. Looking for some info on it

Postby HFin01 on Wed Aug 14, 2019 12:34 pm

Hi

Recently bought a racecar with an ADL2 installed as it's only form of dash/datalogging.

New to the world of Motec but a bit of brute force and ignorance with the DashManager program, I think I've got the bulk of it figured out. Surprised with how much you can do with it.

I was wondering if I could find out it's specs though. Fairly sure it's non back lit with 8MB memory.

Serial number is 7397.

Thank you
HFin01
 
Posts: 2
Joined: Wed Aug 14, 2019 10:32 am
Location: South Island, New Zealand

Re: Bought a car with an ADL2. Looking for some info on it

Postby David Ferguson on Thu Aug 15, 2019 3:14 am

You can check the enabled options yourself. Use the Dash Manager menu Online->Enable Dash Options. This will show the currently enabled options.

What kind of race car?
David Ferguson
Veracity Racing Data
Check out Shift RPM - https://shiftrpm.veracitydata.com
David Ferguson
Pro User
 
Posts: 1013
Joined: Fri Nov 07, 2008 1:45 am
Location: Paso Robles, California

Re: Bought a car with an ADL2. Looking for some info on it

Postby SDean on Thu Aug 15, 2019 8:22 am

Hi,

As David said, you can check the enabled options on the Display using Dash Manager. The enables on that Dash are;

ADL2 # 7397

Options

29130:ENABLE+8M+30IO

29120:PRO ANALYSIS

29102:LAMBDA
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 1006
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne

Re: Bought a car with an ADL2. Looking for some info on it

Postby HFin01 on Thu Aug 15, 2019 8:44 am

Much appreciated guys

Reading through other posts I'd assumed you had to ask MoTeC to look up the serial to see options.

The car is a BA Ford Falcon, BNT (NZ) V8 Supercar.
HFin01
 
Posts: 2
Joined: Wed Aug 14, 2019 10:32 am
Location: South Island, New Zealand

Re: Bought a car with an ADL2. Looking for some info on it

Postby SDean on Thu Aug 15, 2019 9:00 am

Hi,

A lot of the serial number information requests are from people who are looking at purchasing the hardware and are wanting to confirm that what the seller is advertising matches the actual functionality of the device. Others are wanting to sell their hardware and don't have the ability to power it up to confirm what is on the hardware.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 1006
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne


Return to ADL, ADL2 and SDL

Who is online

Users browsing this forum: No registered users and 1 guest