Fuel level averaging on ADL

Discontinued earlier generation Dash Loggers

Fuel level averaging on ADL

Postby Billzilla on Mon Jul 12, 2021 4:38 pm

Got an ADL for one of my road cars and the fuel level reading jumps up & down quite a bit at times, I am wondering if it was possible to have a type of rolling average function, something like take readings once a second for thirty seconds, add them all up then average them to give a more stable reading.
I haven't looked at the ADL function stuff for the best part of a decade, I was hoping that someone might know off the top of their head if something like that's possible.
Ta!
Billzilla
 
Posts: 33
Joined: Wed Aug 13, 2008 4:50 pm

Re: Fuel level averaging on ADL

Postby SDean on Tue Jul 13, 2021 9:55 am

Hi,

The easiest way to filter this is to increase the filter level in the Dash display to the maximum filtering level of 32767ms, this will filter the signal over 32.767 seconds which should assist in smoothing out the display of the level.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 1003
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne

Re: Fuel level averaging on ADL

Postby Billzilla on Tue Jul 13, 2021 3:05 pm

Thanks, I'll give that a go.
Billzilla
 
Posts: 33
Joined: Wed Aug 13, 2008 4:50 pm


Return to ADL, ADL2 and SDL

Who is online

Users browsing this forum: No registered users and 4 guests