LTCD 4.9 configuration on M600

Discussion and support for the MoTeC PLM and LTC's

LTCD 4.9 configuration on M600

Postby 48DZI on Sat Mar 05, 2022 2:37 am

Hello Guys,
Trying to set up an LTCD 4.9 on an M600 (upgrade from old Lambda system)
Think I have done it correctly following manuals etc.
What Lambda value should I have with the ignition on and engine not running?
Thanks
48DZI
 
Posts: 5
Joined: Sat Nov 21, 2009 4:50 am

Re: LTCD 4.9 configuration on M600

Postby SDean on Mon Mar 07, 2022 7:55 am

Hi,

The Lambda channels will read 5.00 until the engine is running and the Lambda sensors are enabled.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 1134
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne


Return to PLM & LTC

Who is online

Users browsing this forum: No registered users and 1 guest