Password M800 plug-in mitsu evo 8

Covers current and earlier Subaru and Mitsubishi Plug-In systems

Password M800 plug-in mitsu evo 8

Postby MyRaw on Wed Dec 01, 2021 3:32 am

Good morning,
I have an M 800 on a mitsubishi evo 8, but it is password locked ..
Unfortunately, whoever entered the password is no longer found ..
Is there no way to remove the password without losing everything?

thank's

Marco
MyRaw
 
Posts: 6
Joined: Fri Oct 08, 2021 12:10 am

Re: Password M800 plug-in mitsu evo 8

Postby SDean on Wed Dec 01, 2021 12:44 pm

Hi Marco,

There is not a way to unlocked the Mx00 firmware if it has been pass worded without loosing the tuning and calibration data in the file.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 1003
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne

Re: Password M800 plug-in mitsu evo 8

Postby MyRaw on Wed Dec 01, 2021 6:18 pm

So do I have to send it to my supplier to reset it or can I request a password to do it myself?
MyRaw
 
Posts: 6
Joined: Fri Oct 08, 2021 12:10 am

Re: Password M800 plug-in mitsu evo 8

Postby SDean on Thu Dec 02, 2021 8:18 am

Hi,

It has to be returned to MoTeC for the Password to be reset, this is organised through an Approved MoTeC Dealer so that the correct paperwork is done.
Stephen Dean
MoTeC Research Centre Melbourne, Australia
User avatar
SDean
Site Admin
 
Posts: 1003
Joined: Tue Dec 02, 2014 9:29 am
Location: Melbourne


Return to M800 Plug-In ECUs

Who is online

Users browsing this forum: Google [Bot] and 4 guests