E888 inputs to C127 - Solved

Includes expansion units, sensors, valves, wiring, communication cables etc.

E888 inputs to C127 - Solved

Postby karel021 on Sun Feb 16, 2020 10:00 am

Is it possible to use the inputs of the e888 and make a table for the inputs in the dash?

suspensions sensors in example.

if so is there a can protocol whats being sent out?
Last edited by karel021 on Mon Feb 17, 2020 4:52 am, edited 1 time in total.
karel021
 
Posts: 43
Joined: Thu Feb 18, 2016 7:01 am
Location: Sweden

Re: E888 inputs to C127

Postby David Ferguson on Mon Feb 17, 2020 1:20 am

You configure the E88 using the C127 Dash Manager. Open your configuration and select Connections->Devices... Use the "Edit.." pop-up in the lower left corner to Add an E888 device (and give it a name). Now you will be able to select the channels on the E888 just like they were internal channels on the C127. Configure/Calibrate them and use the channels for display or other uses.
David Ferguson
Veracity Racing Data
David Ferguson
Pro User
 
Posts: 1102
Joined: Fri Nov 07, 2008 1:45 am
Location: Paso Robles, California

Re: E888 inputs to C127

Postby karel021 on Mon Feb 17, 2020 4:51 am

David Ferguson wrote:You configure the E88 using the C127 Dash Manager. Open your configuration and select Connections->Devices... Use the "Edit.." pop-up in the lower left corner to Add an E888 device (and give it a name). Now you will be able to select the channels on the E888 just like they were internal channels on the C127. Configure/Calibrate them and use the channels for display or other uses.



HOW DID I MISS THIS ?? :lol: :lol: :lol: :lol:

thanks so much :)
karel021
 
Posts: 43
Joined: Thu Feb 18, 2016 7:01 am
Location: Sweden


Return to Accessories and other MoTeC products

Who is online

Users browsing this forum: No registered users and 2 guests