SDC2 sensor ground for direct wheel speed input

Discussion and support for MoTeC's Mitsubishi and Subaru Diff Controllers

SDC2 sensor ground for direct wheel speed input

Postby Mattk@dentsport on Mon Sep 30, 2013 6:39 am

I am trying to discover which pin should be used for sensor ground for the magnetic wheel speed sensors on an SDC2. I have used this setup with an SDC and there is a link to join which makes a certain pin into 0V for the mag sensors. The SDC2 mentions none of this in the manual and I cannot decide where to send the second wire from the speed sensors. Thanks for any help in advance!
Mattk@dentsport
 
Posts: 5
Joined: Thu Jan 20, 2011 2:53 am

Re: SDC2 sensor ground for direct wheel speed input

Postby Dragon on Thu Oct 03, 2013 11:22 am

I think I used A11 for sensor ground.
Dragon
 
Posts: 69
Joined: Thu Jul 10, 2008 9:02 pm

Re: SDC2 sensor ground for direct wheel speed input

Postby Mattk@dentsport on Sun Oct 06, 2013 1:36 am

Thanks! I found some notes from a previous install and we used A11 there also.
Mattk@dentsport
 
Posts: 5
Joined: Thu Jan 20, 2011 2:53 am


Return to MDC and SDC

Who is online

Users browsing this forum: No registered users and 2 guests