Page 1 of 1

SDC3 and M1

PostPosted: Mon May 10, 2021 8:43 am
by kako911
Hello lads

What is the word with an SDC3 and an M1 on GPR ?
Gets more complicated of course !
I am also using a Bosch M4 for ABS on this project... include YAW sensor and of course wheelspeed

Do the can messages come over the same format as the m800 ?

Anything special needs to be done ? Looking to have it run as a standalone unit not as a slave like the Motec STI m1 package.

Cheers

KPA