Wiring looms

Wiring looms

Postby tricky on Sat Jan 28, 2012 11:00 am

A webinar on building wiring looms,

Crimping, joining, splicing, heatshrink and general tips and techniquies to build sucessfull and reliable looms would be amazingly helpfull !!
tricky
 
Posts: 8
Joined: Tue May 03, 2011 8:33 pm

Re: Wiring looms

Postby 20B on Wed Feb 01, 2012 8:36 am

I second that,
As Motec indicate in their installation manual blurb that most problems are caused by poor wiring it would seem logical that this should be top of the list before worrying how to tune the ecu for beginners and even some pro's would benefit I'm sure.
I spent a lot of time making mistakes before someone showed me 'how its done properly'.

Good suggestion tricky ! :)
Mazda 1993 RX7
20B N/A engine
Motec M800,CDI, SDL, SLM, LTC, DHB
User avatar
20B
 
Posts: 140
Joined: Wed Jan 21, 2009 10:18 am

Re: Wiring looms

Postby JamieA on Wed Feb 01, 2012 10:54 am

sounds like a good idea to me..

Ill add it to the list of upcoming webinars.

-Jamie
JamieA
 
Posts: 454
Joined: Wed Apr 30, 2008 2:16 pm
Location: Melbourne, Australia

Re: Wiring looms

Postby tricky on Mon Feb 13, 2012 8:36 am

Thats excellent news ! It would be a breath of fresh air to see some 'practical' webinars.

Thanks Motec :-)
tricky
 
Posts: 8
Joined: Tue May 03, 2011 8:33 pm

Re: Wiring looms

Postby stevieturbo on Tue Feb 14, 2012 8:09 am

Maybe including references to suitable crimp tools etc ( affordable ones lol )
stevieturbo
 
Posts: 490
Joined: Fri Jul 11, 2008 2:32 am

Re: Wiring looms

Postby Hugh on Tue Feb 21, 2012 6:21 am

This would be so helpful.

Being able to correctly wire your ECU / ADL etc is clearly its one of the biggest obstacles to Motec ownership.

My earlier wiring attempts have taught me enough to know that I need to know much more for my next car build.
Hugh
 
Posts: 21
Joined: Thu Jul 10, 2008 9:34 pm

Re: Wiring looms

Postby Fast_Moto on Sun Apr 08, 2012 7:41 am

I agree. It took me a lot of time to do it (more or less) right. Even the basics (like use stress relief loops for splices of wires) are good things to teach. There are resources out there, but it takes a lot of time to find them.
Fast_Moto
 
Posts: 108
Joined: Mon Apr 19, 2010 11:49 am

Re: Wiring looms

Postby niko89 on Sun Jul 14, 2013 9:50 pm

Any development regard this webinar ? :D
niko89
 
Posts: 1
Joined: Sun Jan 22, 2012 9:51 am

Re: Wiring looms

Postby ronl98 on Wed Jan 06, 2016 2:26 pm

also checking on any updates for this webinar
ronl98
 
Posts: 1
Joined: Wed Feb 22, 2012 6:10 pm

Re: Wiring looms

Postby stevieturbo on Sun Jan 17, 2016 7:13 am

Not a webinar, but seen someone link to this on another forum, good info there

https://www.rbracing-rsr.com/wiring_ecu.html

https://www.rbracing-rsr.com/wiring_ecu.html#supplies
stevieturbo
 
Posts: 490
Joined: Fri Jul 11, 2008 2:32 am

Next

Return to Webinar Requests

Who is online

Users browsing this forum: No registered users and 3 guests

cron