Ingesting data from an Autronic ECU

information about how to make an ECU (MoTeC or non MoTeC) work with a MoTeC dash or data logger

Ingesting data from an Autronic ECU

Postby Holmz on Sat Apr 03, 2010 2:02 pm

A friend has a desert buggy running a t/c Nissin 2 litre.
The plan is to put the ACL on there and the VIM, and get damper position data.
Can one ingest the Autronic ECU data into the ACL? What do I need to have?
I am think maybe CAN addresses from the Autronic(?), but have no idea really.
User avatar
Holmz
 
Posts: 521
Joined: Fri Dec 19, 2008 5:19 pm
Location: Australia and the USoA

Re: Ingesting data from an Autronic ECU

Postby JamieA on Fri Apr 09, 2010 9:15 am

yes, that will work just fine.

Wire the Autronic coms cable RS232 TX pin to the ACL RS232 RX pin, and use the SM? template.

Been done many times (not into an ACL of course, but on the other dash's)

you may also have to hook up the ground wire from the Autronic comms cable to make it work.

-Jamie
JamieA
 
Posts: 454
Joined: Wed Apr 30, 2008 2:16 pm
Location: Melbourne, Australia

Re: Ingesting data from an Autronic ECU

Postby Holmz on Sat Apr 10, 2010 4:12 pm

Thanks Jamie...
:ugeek:
User avatar
Holmz
 
Posts: 521
Joined: Fri Dec 19, 2008 5:19 pm
Location: Australia and the USoA


Return to ECU to Dash Comms

Who is online

Users browsing this forum: No registered users and 1 guest