D153 remember value

Discussion on the use of Display creator software for MoTeC Colour displays

D153 remember value

Postby thr on Sun Aug 25, 2019 6:17 am

Hi.
We got a D153 as second display for our co-driver.
(The primary is a C127)

I’v created a menu in DC on the D153, where the co-driver is able to set a value on a channel (unassigned).
The value is compared to another channel to activate an alert.

My problem is, that the channel reset’s, when the D153 turns off/on.
Can I solve that ?

Thanks !
thr
 
Posts: 5
Joined: Wed Apr 25, 2018 4:21 am

Re: D153 remember value

Postby adrian on Mon Aug 26, 2019 1:27 pm

The D153 does not have the ability to save channel values through a power cycle. What you would need to do is send the menu channel on CAN to the C127, preserve it there and then send it back.
adrian
MoTeC
 
Posts: 675
Joined: Mon Apr 13, 2015 4:16 pm

Re: D153 remember value

Postby thr on Thu Aug 29, 2019 2:58 am

Thanks Adrian

I thought so, about the D153
But as I can see, the D153 can’t transmit, only recieve.
Or am i wrong ?

Br Brian
thr
 
Posts: 5
Joined: Wed Apr 25, 2018 4:21 am

Re: D153 remember value

Postby adrian on Thu Aug 29, 2019 8:05 am

As long as you have the latest version of DC then it can transmit too.

Just create a new message in the communications setup and then on the right hand side you can select transmit instead of receive.
adrian
MoTeC
 
Posts: 675
Joined: Mon Apr 13, 2015 4:16 pm


Return to Display Creator

Who is online

Users browsing this forum: No registered users and 2 guests