Error Calculating Device Configuration (Contact MoTec)

Discussion on the use of Display creator software for MoTeC Colour displays

Error Calculating Device Configuration (Contact MoTec)

Postby Kroozer on Sun May 30, 2021 10:06 am

This error started to occur when I wanted to cut and paste a new page from a different project into an existing project.
I have done this before in an older version of Display Creator and had no issues. :P
Current version (x64) 6.4.0.95
I have looked and followed the thread for (WINDOWS 10 x64 COMPILER ERROR) and this may be a different issue as I could not resolve my issue (Error Calculating Device Configuration).

I have logged a case #30755

Any suggestions are welcome.
Attachments
188978391_497913338094742_5557027677871244562_n.jpg
This page is what I want to re insert into a project
188978391_497913338094742_5557027677871244562_n.jpg (970.42 KiB) Viewed 917 times
187450567_1244261076019681_5133476954994859830_n.jpg
Error message that comes up
187450567_1244261076019681_5133476954994859830_n.jpg (1.43 MiB) Viewed 917 times
191828681_305938797752877_3358969744553777397_n.jpg
Temp Folder has files in it
191828681_305938797752877_3358969744553777397_n.jpg (1.01 MiB) Viewed 917 times
Kroozer
 
Posts: 15
Joined: Mon Nov 11, 2013 9:05 am

Re: Error Calculating Device Configuration (Contact MoTec)

Postby Kroozer on Mon May 31, 2021 1:30 pm

Awesome, Motec got back to me..

It looks like DC isn't copying across all of the settings inside the bar graphs
(the needle start and end points are either 0 or a weird number) and that is
causing the issue. I have logged a bug report in our system to get it fixed, in
the mean time I have manually fixed up your config so it will build properly
now.

Many Thanks
Attachments
DC Bug.png
Ticks not copied across properly
DC Bug.png (312.85 KiB) Viewed 860 times
Kroozer
 
Posts: 15
Joined: Mon Nov 11, 2013 9:05 am


Return to Display Creator

Who is online

Users browsing this forum: No registered users and 1 guest